Ceiling Sprinkler Hose not only give you fire protection but also contamination protection and leak-proof. With no required in-field assembly, each one-piece unit installs in about 10 minutes. It’s a simple matter of connecting to the sprinkler main, then inserting the one-piece, stainless steel sprinkler drop through the ceiling grid and securely fastening it down. In service, the flexible connection between the sprinkler main and ceiling grid dissipates any vibration, so gel seals remain intact, even in seismically active areas.

Relocating a sprinkler head is just as easy. With the water pressure turned off, simply unbolt the grid attachment, move the head to a new port location, and fasten into place. Because installation takes a faction of the time of out-dated hard-piped systems, rooms can be certified and online faster- a critical factor in getting your rooms up and running. And the speed of relocation means reconfiguration. In contrast, traditional hard-piped installation or relocation is far more labor and material-intensive within the clean space. Hard-piped systems continually jeopardized both the air and the filters. And with multiple joints per installation, leaks are always a potential threat.

Benefit for using this hose

Easier and Quick to Install
The system is easier and quick to install even in areas of limited space or even to relocate the sprinkler head.

Contamination Protection & Leak Proof
Eliminates contamination and leaks due to mis-aligned hard-piped installation.

Durability
The system is manufacture from Stainless Steel 316 material.

Safety
The system is design to operate even under the water pressure of 25kg/cm² and water hammer pressure from 3.5kg/cm² to 35kg/cm² at 4000 times.

Economical
As the system is very flexible, it does not take a lot of time to install and no special tools are needed for installation.